Step 1 Connection; Enjoying Multi-Channel Surround Sound; Step 2 The Remote Control; Step 3 Quick Setup - Panasonic DVD-S100 Manuel D'utilisation

STEP 1
Connection

Enjoying multi-channel surround sound

≥Select "Off" in "Audio Output" (➜ 16, "HDMI" menu).
WITH COAXIAL IN or OPTICAL IN
Amplifier with a built-in
decoder or a decoder-
amplifier combination
COAXIAL IN OPTICAL IN
Coaxial
or
cable
OPTICAL
COAXIAL
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
STEP 2
The remote control
∫ Batteries
R6/LR6, AA
STEP 3
QUICK SETUP
STEP 4
TV operation
(You can use this unit's remote control to operate your TV.)
6
6
≥You cannot use DTS Digital Surround decoders
not suited to DVD.
≥Even if using this connection, output will be only
2 channels when playing DVD-Audio.
To enjoy multi-channel surround sound, connect
with 5.1 ch AUDIO OUT terminals (➜ right) or
HDMI terminals (➜ 5).
Optical digital audio cable
Do not bend sharply when connecting.
≥Change "PCM Digital Output", "Dolby
CENTER
Digital" and "DTS Digital Surround"
(➜ 16, "Audio" menu).
SUBWOOFER
Back of the unit
5. 5.1
≥Insert so the poles (i and j) match those in the
remote control.
≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Turn on the TV and select the appropriate video input on the TV.
1 2
SETUP
Power on. Shows QUICK
SETUP screen.
To change these settings later
Select "QUICK SETUP" (➜ 16, "Others" menu).
Point the remote control at the TV.
1 While pressing [Í TV], enter the code with the numbered buttons.
Input a remote control code number referring to the table on the back cover.
e.g., 0001: [0] ➜ [0] ➜ [0] ➜ [1]
≥If your TV brand has more than one code listed, select the one that allows correct operation.
≥If your TV brand is not listed or if the code listed for your TV does not allow control of your TV, this remote control is not
compatible with your TV. Use the TV's remote control.
2 Test by turning on the TV and changing channels.
Amplifier
WITH AUDIO IN 5.1ch
To obtain maximum performance of DVD-Audio multi-channel
PCM sound, this connection is recommended.
COAXIAL IN
CENTER SUBWOOFER
CENTER
OPTICAL OPTICAL
SUBWOOFER
Mishandling of batteries can cause electrolyte
leakage which can damage items the fluid contacts
and may cause a fire.
Remove if the remote control is not going to be used
for a long period of time. Store in a cool, dark place.
∫ Use
Aim at the remote control signal sensor (➜ 7),
avoiding obstacles, at a maximum range of 7 m (23
feet) directly in front of the unit.
3
RETURN
Follow the message
and make the settings.
SURROUND FRONT
(L) (R) (L) (R)
Audio cable
Connect cables to
terminals corresponding to
the speakers you have
connected.
≥Change "Speaker
SURROUND FRONT L/L
Settings" (➜
L L L
"Audio" menu and
page 17, Changing
the speaker setting
to suit your
R R
FRONT R/R
speakers).
5.1ch 2ch 2c 2 2 h
AUDIO OUT
4
ENTER
Press to finish
QUICK SETUP.
16,
5
SETUP
Press to
exit.