Amplicomms PowerTel 601 Mode D'emploi page 20

G
ETTING STARTED
If you use a PowerTel 880:
Press and hold until you see Register on the display.
Note: if you can't see the registration key , refer to the front fold-out.
• You'll know your wrist shaker is registered and ready to use when the registration light
is a steady green (i.e. it isn't flashing).
Note: the registration light will flash green and red if your wrist shaker either isn't re-
gistered or is out of range. Move closer to your PowerTel telephone to ensure you are
within range.
16