Amplicomms PowerTel 601 Mode D'emploi page 18

G
ETTING STARTED
Set up your wrist shaker in four simple steps
1. Position your charger unit
Make sure your charger unit:
• is on a dry, flat and stable surface
• isn't a trip hazard with its power cable
• is at least one metre from other electrical appliances
2. Plug in the charger unit
Plug your charger unit into your power supply.
And switch on at socket.
Important: use only the power adapter supplied
with your PowerTel 601 otherwise it may not
work and it could damage the product.
3. Place the wrist shaker in the charger unit
When you place your wrist shaker on its charger unit, make sure its two connection
points are facing down into the unit. You'll know your wrist shaker is charging properly
when you see a red light on it.
Your wrist shaker has an internal rechargeable battery which must be charged before you
can use it. So it can charge fully, your wrist shaker needs to charge for at least 10 hours
14