Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.
Click Message
the welcome message starts playing tap
function.
5.
Subsequently, change the TONE TYPE from SYSTEM TONE to USER TONE.
6.
Subsequently, for the welcome message select (WELCOME MESSAGE).
7.
Return to the recorded messages, select your concluding message. As soon as the concluding
message starts playing tap
8.
Where you selected welcome message (STARTING TONE) before, you now select concluding
message (CONCLUDING TONE).
9.
Here you can also set the volume of the voicemail function.
Motion detection recording
The motion detection recording function enables you to know at all times if someone is at your
front door. Once this function is enabled, the outdoor unit starts recording at set times if motion is
detected. The standard recording time is set to 1 minute. The motion sensitivity level of the
motion detector can be adjusted accordingly. Caution: A micro SD card is required to use this
function.
Activate motion detection recording
In order to enable the motion detection recording function, take the following instructions into
account:
-
A micro SD card of at least 2 GB or more should be inserted in the monitor. For optimal
performance of the DVR function we recommend using a SD card of 8 GB or more.
-
For high quality video select the 1280x720 resolution in the settings menu.
Follow the steps below to enable motion detection recording:
1.
In the main menu select .
2.
Subsequently select .
3.
Then make sure to set DVR to ENABLE and activate Motion detect sensitivity.
4.
Now the fuction is ready to use.
Change settings
Tap the left/right arrow to change the settings. Swipe up or down to scroll through the menu.
General settings
In this menu you will find the general settings of the device.
- 17 -
in the main menu and select the recorded welcome message. As soon as
on in this screen to configure the voicemail function.
on in this screen to configure the voicemail
Publicité
Chapitres
Table des Matières
