Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7.
By pressing
push is connected).
8.
Press
to forward a conversation to a second monitor
monitor is connected).
9.
Press
to return to the main menu
10. Press
to enter the video settings
If the call is not answered the monitor switches back to standby mode. The time you have to
answer incoming calls can be set at "Melody Duration" in the Settings menu.
Voicemail function
This video door intercom is equipped with a voicemail function. If an incoming call is rejected or
unanswered a standard message or message selected by the user, is played after the ringtone has
finished. Subsequently, the visitor is given the option to leave a message of approximately 20
seconds. This is followed by a closing message, selected by the user. If a visitor has left a message,
a red ball indicator becomes visible in the main menu at Message to indicate that a new message
has been saved.
Activate voicemail function
-
Go to the Settings menu.
-
Select .
-
Swipe to the second page and activate the voicemail function by selecting "Leave automatic
message".
Record outgoing messages
The standard outgoing messages are saved in the monitor's internal memory and cannot be
changed. If you would like to record your own outgoing message, it is necessary to insert an SD
card in the monitor
1.
In the main menu select Record
your call cannot be answered right now but please leave a message after this message ends").
Select Record
2.
Repeat this step to record a concluding message (e.g. "Thank you for your message, we will
get in touch with you soon").
3.
In the main menu at Message, a red ball indicator becomes visible to indicate that new
messages have been recorded.
- 16 -
you change the point of view. (only available if more than one camera/bell
and record your welcome message (e.g. "unfortunately,
again to end the
recording.
(only available if more than one
Publicité
Chapitres
Table des Matières
