Features; Configuration And Operation; Remote Monitoring And Control - Tripp-Lite DU3VN Serie Manuel Du Propriétaire

Features

A

Configuration and Operation

Remote Monitoring and Control

The PDU provides remote monitoring
outlet control
B
telnet and SNMP-based Network Management
Systems. For more information about
configuration and operation of the PDU via
thePowerAlert Web browser interface, refer to
the SNMPWEBCARD User's Guide, included on
the CD-ROM bundled with the PDU.
21-03-394-933038.indb 8 21-03-394-933038.indb 8
RJ-45 CONFIG Port: The port is reserved for configuration by factory
authorized personnel only. Do not connect anything to this port.
Ethernet Port: Use this RJ-45 jack to connect the PDU to the network
with a standard Ethernet patch cable. The Link LED
indicate several operating conditions, as shown in the table below.
B
This port is not compatible with PoE (Power Over Ethernet) applications.
B
Link LED Color
A
Off
Flashing Amber
Flashing Green
Status LED Color
B
Off
Steady or Flashing Green
Steady Amber
,
A
and more via Web browser,
Network Operating Conditions
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
A
B
8
and Status LED
A
4/1/2021 11:22:43 AM 4/1/2021 11:22:43 AM