Instructions For Assembly - Ingo Maurer MaMo Nouchies Samurai Instructions

Important information about the paper
The paper used in this lamp is a natural, untreated product. Minor
surface flaws are a result of the manufacturing process. The paper
shade is hand-made, by a patented process (requiring up to eight
different treatments) based on a traditional Japanese method of
textile dyeing. The results look superficially similar, but in fact each
shade is unique.
To protect the paper, the following points should be noted:
• Avoid exposure to damp: do not use the lamp in bathrooms,
kitchens or other rooms where condensation may occur.
• Avoid exposure to strong sunlight or draughts.
• Although the paper is a sensitive material, it can, if necessary,
be gently extended. ①
Do not overstretch it, otherwise it will lose its elasticity and
become unable to regain its shape.
• Do not unfold the paper in the "wrong" direction (i.e. against the
crease), as this will damage the fibres. ②
In some cases, the shade takes some time to assume its proper
shape, as the paper has to hang and relax for a while.
Touching the surface may cause shallow dents – these can be
removed by gently pushing them out from the opposite side with
your fingers.
7

Instructions for assembly

Please be very careful when removing the lamp from the packaging,
so as not to damage the paper shade.
Remove the cable ties and unwind the cables completely.
u Operation
Connect lamp cable to plug-in transformer. ③
To switch the lamp ON or OFF, press the dimmer switch. Keep
the switch pressed down longer for dimming. ④
The dimming stops when the highest or lowest possible brightness
is reached. For further dimming, release the button and then press it
again. Please do not hold the button down continuously (> 20sec.).
u Cleaning
Important: Never moisten the paper shade!
Clean the shade if necessary with a light feather duster or paint-
brush. The metal parts can be wiped with a dry cloth.
8