Installation And Putting Into Operation; Scope Of Delivery - Mettler Toledo P25 Guide De L'utilisateur

2 Installation and Putting into Operation

2.1 Scope of delivery

AC/DC adapter
•
Power cable (country specific)
•
User Manual
•
Declaration of conformity
•
2.2 Connecting the printer to the power supply
WARNING
Death or serious injury due to electric shock
Contact with parts that carry a live current can lead to death or injury.
1 Only use the approved METTLER TOLEDO power supply cable and AC/DC adapter with a
current-limited SELV output.
2 Connect the power cable to a grounded power outlet, ensure correct polarity.
3 Keep all electrical cables and connections away from liquids and moisture.
4 Check the cables and power plug for damage and replace damaged cables and power plugs.
NOTICE
Damage to the AC/DC adapter due to overheating
If the AC/DC adapter is covered or in a container, it is not sufficiently cooled and will overheat.
1 Do not cover the AC/DC adapter.
2 Do not put the AC/DC adapter in a container.
The printer is supplied with a universal AC/DC adapter or an AC/DC adapter with a country-specific power cable.
Install the cables so that they cannot be damaged or interfere with operation.
•
Insert the power cable in a grounded power outlet that is easily accessible.
•
1 Connect the AC/DC adapter to the connection socket on the
back of the printer.
2 Lock the connector with the screw nut.
3 Connect the 3-pin grounded power cable to the socket for
the AC/DC adapter.
4 Connect the printer and the balance with the interface
cable.
5 Switch the balance on.
6 Connect the printer to the power supply.
7 Switch on the printer with the I/O switch.
Printer
I/O
5