Jaquet Droz THE POCKET WATCH Mode D'emploi page 3

INSTRUCTIONS FOR USE
V2
THE POCKET WATCH
max 25°
0°
V1
The crown has three
positions
Screwed position
Neutral position
Time-setting position
Starting the watch
Unscrew the crown to position
. This position enables you
to restart the hand-winding
mechanical movement manually
by turning the crown to the left
( ).
Important note: Ideally, this
should be done once a day.
When the maximum is reached
a slight resistance will be felt.
Setting the time
Unscrew the crown to position
. Pull the crown out to
position . Turn the crown to
the left ( ) to move the hands
to the required time.
For accurate time-setting,
ensure that the last adjustment
of the hands is made in a
clockwise direction.
After this operation, push the
crown back to position ; then
turn the crown to the right
( ) to ensure it turns freely,
then screw the crown back in
position .
Kindly remember (VI): For
accurate opening of the caseback,
ensure that the key is turned
in a counterclockwise direction
of maximum 25°.
Kindly remember: This watch
is not water-resistant.