Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLE
No steam is coming out and
suction is not working.
The machine keeps
loading water and the
no water lamp (F) illuminates.
Little drops of water
dripping from the accessories
Suction is not working.
INSTRUCTIONS FOR USE
CAUSE
Boiler not yet
under pressure
(green lamp off).
Power failure.
Appliance is unplugged
Check the O-rings on
the hose ports to the tank (M)
There is no water in
the tank (M)
This condition is normal during
the first minutes of operation.
Condensate will form because
of a difference in temperature
between the accessories and
steam.
Recovery tank is full
Fill cap (L) not screwed tight.
43
REMEDY
Wait a couple of minutes for
the green lamp to illuminate,
if the problem is still there, call
a service centre.
Check that power is available,
check for proper connection of
the plug to the power
outlet.
Check for proper
connection of the appliance
plug to the socket
on the electric panel.
Replace the O-rings
Fill the tank (M)
The inconvenience is normally
eliminated after a few minutes
of operation. If the trouble is
still there, clean the boiler.
Switch off the appliance.
Empty the tank (L)
Check position of
float.
Properly close the
tank (L) using
the handle (L1)
Publicité
Table des Matières
