Connecting The Accessories; Using The Accessories - Capitani Vapor 3000 A Plus Mode D'emploi

CONNECTING THE ACCESSORIES

The accessories can be connected directly to the handle of
the work hose (20). For certain cleaning tasks, it may be
convenient to install the extension tubes between the handle
and the accessory to ease cleaning.
To connect the dif ferent components, simply:
- install the male end of either component to the female end
of the other and use the red lever to secure proper
engagement. (Fig. 12)
Failure to secure the accessories using the lever provided
can pose a hazard, as the accessories may suddenly
separate while the machine is in operation.
All the accessories are capable of:
delivering steam and/or detergent and vacuuming.
To remove the accessories:
- stop the steam function by operating button (21) on the
handle;
- stop the vacuuming function by operating button (22) on
the handle;
- press the red lever that locks the accessories into place.
Now, you can disconnect the accessories.

USING THE ACCESSORIES

The appliance is supplied with a set of accessories to meet
all cleaning needs.
MULTIPURPOSE BRUSH
- The multipurpose brush consists of a universal element (10)
(Fig. 13) to which the following parts can be fitted as
needed:
- Bristled frame (11) for removing stubborn dirt from hard
floors and surfaces (Fig. 14)
- Frame with rubber strips for vacuuming steam and/or
detergent off hard surfaces (Fig. 15).
- Bristled frame with stiff inserts (12) for fitted and non-fitted
carpets. (Fig.16)
INSTRUCTIONS FOR USE
38
5
Fig. 12
10
Fig. 13
11
Fig. 14
12
Fig. 15