Important - Imetec R9006 Instructions Pour L'utilisateur

WARNING! DO NOT crease the appliance by placing items
on top of it during storage.
EN
WARNING! For use, cleaning, maintenance and storage of the
appliance, please follow the instructions specified in the
corresponding chapters.
• Persons with a pacemaker must not operate this appliance when they are in bed:
it can be used to pre-heat the bed but it must be switched off and disconnected
from the mains supply before going to bed.
• DO NOT use the appliance with wet hands or damp feet.
• DO NOT pull the power cable or the appliance itself to remove the plug from
the socket.
• DO NOT pull or lift the appliance by the supply cord.
• DO NOT expose the appliance to humidity, to the effects of weather (rain,
sun, etc.) or to extreme temperatures.
• If the appliance is faulty or malfunctions, switch it off and do not tamper with it.
Contact an authorised technical service centre for any repairs.
• DO NOT use this appliance to warm animals.
• DO NOT tuck in.
• See the external packaging for the characteristics of the appliance.
POSITIONING THE HEATED MATTRESS COVER
WARNING! The heated mattress cover must only be placed
between the mattress and the flat sheet and not on top of
persons in bed.
IMPORTANT: The heated mattress cover only works efficiently if it is positioned
inside the bed and covered with a bed sheet, covers or quilt.
• Place the heated mattress cover (5) directly onto the mattress with the connector side
facing downwards at the top part of the mattress.
• Fit the heated mattress cover to the mattress turning the edges of the skirt under the
mattress. Make sure the heated mattress cover is always spread out smoothly and
that there are no creases.
• Make the bed, laying the first sheet on top of the heated mattress cover. Place the
second sheet and the normal blanket or duvet on top.
CONNECTING THE CONTROL UNIT
• Place the connector of the control unit through the triangle opening that you will find
15
USE