Assembling Your Auto-Spiralizer - Ninja NN210C Instructions

ASSEMBLING YOUR AUTO-SPIRALIZER™

IMPORTANT: Review all
warnings on pages 3–6
before proceeding.
IMPORTANT: As a safety
feature, if the Spiralizer
Bowl and Feed Chute Lid
are not properly installed,
the timer will display "--"
and the motor will be
disabled.
NOTE: To fit properly, the
tabs on the sides of the
Blade Disc must align with
the gaps on the top of the
Collecting Bowl.
19
1-877-646-5288
1
Place the unplugged
motor base on a clean,
dry, and level surface
such as a countertop or
table. Press downward on
the motor to adhere the
suction cups to the work
surface. Ensure the motor
base is connected to
power.
2 Lower the Spiralizer Bowl
onto the motor base.
3 Rotate the Spiralizer Bowl
clockwise until it clicks into
place.