Kohler K-T6908 Guide D'installation page 3

7/16"
(1.1 cm)
1. Install the Spout
Remove the temporary nipple.
Apply thread sealant and install a 1/2" nipple so it extends 7/16"
(1.1 cm) beyond the finished wall.
Apply a bead of plumbers putty or other sealant around the inlet
end of the spout according to the manufacturer's instructions.
Apply thread sealant to the nipple and thread the spout onto the
nipple.
Carefully tighten with a clean strap wrench.
Remove any excess putty.
Kohler Co.
All manuals and user guides at all-guides.com
Nipple
Spout
Apply plumbers
putty.
3 114487-2-CC