Care & Maintenance - ANSMANN PL 8 Manuel D'instruction

The charger is now ready for use. You can insert 1-8 AA/AAA (or combination
of both sizes) NiMH or NiCd rechargeable batteries. You can also connect a USB
cable using the USB port to charge other devices such as a mobile phone, smart
phone or MP3 player. Insert all batteries with correct polarity corresponding to
the symbols in the charging slot. The charging process starts automatically. If
desired, press the "DISCHARGE" button to discharge all inserted batteries before
charging. Once a battery is discharged it will automatically be recharged. If you
select the discharge function, all batteries which you insert while a discharging
or charging process is running will be discharged before charging. If this is not
required, press the "DISCHARGE" button again and all inserted batteries will
be charged.
It is normal that batteries may become warm during charging. Once a battery is
fully charged, the charger automatically switches to trickle charge. The trickle
charge prevents self discharge of the batteries when left in the charger.
LED INDICATORS / CHARGE MODES
> Fast charge mode
> Battery fully chargedtrickle charge mode
> Discharge mode
> Faulty battery or alkaline battery detected
ENVIRONMENT
Do not dispose of the device in the normal household waste. Please return it to
your dealer, nearest recycling centre or collection point. Please also recycle all
packing materials
CARE & MAINTENANCE
To make sure that the charger works properly, please keep the contacts in the
charging slots free from dirt and dust. To clean the unit disconnect it from the
mains and only use a dry cloth.
.
LED lights red „Charging"
LED lights green „Ready"
LED flashes red/green
„Discharging"
LED flashes red „Error"