MINN KOTA MKA-51 Mode D'emploi

COMPATIBLE WITH MINN KOTA ® FRESHWATER ELECTRIC-STEER TROLLING MOTOR MODELS, INCLUDING THE
ULTERRA™, TERROVA ® , POWERDRIVE™, POWERDRIVE V2 AND POWERDRIVE PONTOON.
Item /
Part # Description
Assembly
A
2994936 BAG ASM, ES SLIDING QRB
Items 2-10
2 2223446 SCREW-1/4-20 X 2" PFH SS
4 2373484 SCREW-1/4-20 X 7/8 PFH SS
6 2263103 NUT-1/4-20 NYLOCK SS
8 2261713 WASHER-1/4 FLAT 18-8 SS
10 2371712 WASHER-FLAT 9/32 X 5/8 X 1/16
B
2771998 BOTTOM PLATE KIT, MKA-51 QRB
Items 12-16
12 2381958 PLATE-BOTTOM, QRB, MACH
14 2228413 CAM PUCK - MACHINED
16 2373428 SCREW-5/16-18 X 3/4" PFH SS
C
2771997 TOP PLATE KIT, MKA-51 QRB
Items 18-40
18 2381956 PLATE-TOP, QRB, MACH
20 2373611 DRAWBAR, ES QRB
22 2222716 SPRING,COMPRESSION OD.480
24 2373260 STOP, DRAW BAR
26 2383431 SCREW-1/4 X 3/4 TY AB PFH
28 2225110 PAD, URETHANE,QCK ATTACH
30 2381948 EXTRUSION BACKER, MACH QRB
32 2228415 CAM ARM, QCK ATTACH PLATE
34 2262635 PIN-ROLLER, S/S
36 2372623 PIN W/RING, QRB
38 2373650 LANYARD ELECTRIC STEER,QRB
40 2372644 PIN-ROLL, .093 x 5/8" SS
p Not shown on Parts Diagram.
✖ This part is included in an assembly and cannot be ordered individually.
TOOLS AND RESOURCES REQUIRED
• #3 Phillips Screw Driver
• Drill
MOUNTING CONSIDERATIONS
It is recommended that the motor be mounted as close to the centerline of the boat as possible. The motor must not
encounter any obstructions as it is lowered into the water or raised into the boat when stowed and deployed. Make sure the
motor rest is positioned far enough beyond the edge of the boat. Make sure the area under the mounting location is flat, clear
to drill holes and install nuts and washers.
©2017 Johnson Outdoors Marine Electronics, Inc.
MKA-51 Electric Steer Quick Release Bracket
Qty.
1
6
6
C
12
6
6
1
1
1
1
1
1
1
1
1
B
2
1
1
1
1
1
A
1
1
• 9/32" Drill Bit
• 7/16" Box End/Open End Wrench
38
22
28
30
40
2
6
10
• A second person to help with
the installation
1854051
18
26
20
24
36
34
32
12
14
16
4
8
minnkotamotors.com | 1