Menuett 004271 Traduction Des Instructions D'origine page 18

● Let the product become cool before you clean
it or do maintenance on it.
● Let the product become cool before you put it
in storage.
● Keep the product in a dry and closed storage,
away from children, when the product is not in
operation.
● Clean the product regularly.
3 Operation
3.1 To use the product
Warning! Do not touch hot surfaces. Some surfaces
on the product become hot when the product is in opera-
tion.
Caution! Do not use sharp utensils or metal utensils
on the product. Sharp utensils and metal utensils can cause
damage to the glass surface.
Caution! Do not pull or push cookware across the
cooking zone. The cooking zone can become damaged.
(Figure 2)
Note! Make sure that you push the touch buttons correctly.
(Figure 3)
1
Connect the power plug of the product to an earthed
power outlet.
2
Put a your cookware in the cooking zone on the top
of the product.
Caution! Do not use dirty cookware on the product.
Dirty cookware can cause damage to the product.
Note! Only use cookware intended for induction hobs.
Non-induction cookware will not operate correctly on an
induction hob. Refer to the operator's manual for your
cookware.
Note! If the cookware is not compatible with an induction
hob, the error code "EO" will show in the display.
Note! Only use cookware that has a base diameter of 12–26
cm.
18
3
Press the ON/OFF button. The light indicator for the
ON/OFF comes on and the product starts to warm
the cookware at default power setting (1200 W).
(Figure 4)
4
Press the FUNCTION button. The light indicator for
temperature comes on.
5
Press the + and - buttons to adjust the temperature.
6
Press the FUNCTION button. The light indicator for
timer comes on.
7
Press the + and - buttons to adjust the timer setting.
The timer can be adjusted between 0 and 180
minutes. The product starts automatically after 5
seconds and stops automatically when the selected
time has ended.
Note! A sound is given 30 seconds before the product stops.
8
Press the LOCK button to lock the touch buttons. The
light indicator for the LOCK button comes on.
Note! To unlock the touch buttons, press and hold the LOCK
button until you hear 2 beeps.
Note! The LOCK button does not lock the ON/OFF button.
4 Maintenance
4.1 To clean the product
Warning! Let the product become cool before you
clean it.
Caution! Do not use abrasive utensils or corrosive
detergents when you clean the product. Abrasive utensils
and corrosive detergents can cause damage to the non-stick
coating on the hotplates.
Caution! Do not rinse the product with water. The
electrical components in the product can become damaged.
● Clean the product after each use.
● Clean all surfaces with a damp cloth and a mild
detergent.
● Wipe the base and the top surface with a damp cloth. Let
the product become dry.
● Clean the air intakes and air outlets with a vacuum
cleaner.
2022_001