Hendi 230268 Manuel De L'utilisateur page 12

Troubleshooting
PROBLEM
The dishwasher does not operate
properly
The appliance operates, but the
switch LED does not light on
Boiler heating does not operate
EN
Boiler heating operates, but LED
does not turn on
Dispenser heating does not operate
The 85°C thermal fuse is faulty. The
dispenser's fuse is burned out
Pump motor does not operate
12
CAUSE
Connection interruption
You have not turned the switch of the
appliance ON
Main switch / or fuse has not been
activated / or it is faulty
The switch of the appliance is faulty
The water inlet valve is faulty
The door is not closed
You have not turned the water supply
on
The LED is faulty
Switch or main switch or fuse has not
been activated
The safety thermostat of the boiler is
faulty
The 93°C thermal fuse of the boiler
is faulty
Pressure regulator is faulty
"Boiler heating" relay is faulty
Boiler fuse is burned out
Faulty LED
Switch N1 of the appliance or main
switch or fuse has not been activated
"Compartment heating" relay is
faulty
The thermostat switch of 60°C
heating is faulty
"Compartment heating" relay is
faulty
Main switch or fuse is not activated.
The door is not closed.
Main relay is faulty
Pump motor is faulty
Program selection switch is faulty
SOLUTION
Check the connection
Turn the switch ON
Check the main switch / or fuse
Refer to the authorized local dealer
who sold the appliance or directly to
the manufacturer
Close the door
Turn the supply on
Change the LED
Check the switch of the appliance
and the main switch or fuse
Refer to the authorized local dealer
or the manufacturer
Refer to the authorized local dealer
or the manufacturer
Refer to the authorized local dealer
or the manufacturer
Change LED
Activate the corresponding switch or
fuse
Wait
Refer to the authorized local dealer
or the manufacturer
Activate the main switch or fuse
Close the door
Refer to the authorized local dealer
or the manufacturer