Télécharger Imprimer la page

Steinbach SBS-LZ-1000SLS Manuel D'utilisation page 20

Centrifugeuse de laboratoire

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 51
The use of correct and approved personal protective equipment reduces
the risk of injury.
f)
To prevent the device from accidentally switching on, make sure the
switch is on the OFF position before connecting to a power source.
g)
Do not wear loose clothing or jewellery. Keep hair, clothes and gloves away
from moving parts. Loose clothing, jewellery or long hair may get caught in
moving parts.
h) The device is not a toy. Children must be supervised to ensure that they
do not play with the device.
i)
Do not put your hands or other items inside the device while it is in use!
2.4.
Safe device use
a)
Do not use the device if the ON/OFF switch does not function properly (does
not switch the device on and off). Devices which cannot be switched on and
off using the ON/OFF switch are hazardous, should not be operated and must
be repaired.
b)
Disconnect the device from the power supply before commencement of
adjustment, cleaning and maintenance. Such a preventive measure reduces
the risk of accidental activation.
c)
When not in use, store in a safe place, away from children and people not
familiar with the device who have not read the user manual. The device
may pose a hazard in the hands of inexperienced users.
d) Keep the device in perfect technical condition. Before each use check for
general damage and especially check for cracked parts or elements and
for any other conditions which may impact the safe operation of the
device. If damage is discovered, hand over the device for repair before
use.
e) Keep the device out of the reach of children.
f)
Device repair or maintenance should be carried out by qualified persons,
only using original spare parts. This will ensure safe use.
g) To ensure the operational integrity of the device, do not remove factory-
fitted guards and do not loosen any screws.
h) Avoid situations where the device stops working during use due to
excessive loading. This may result in overheating of the drive elements and
damage to the device.
i)
Do not touch articulated parts or accessories unless the device has been
disconnected from the power source.
j)
Do not move, adjust or rotate the device in the course of work.
k) Do not leave this appliance unattended while it is in use.
l)
Clean the device regularly to prevent stubborn grime from accumulating.

Publicité

loading