Black & Decker Performance TO5000SD Guide D'utilisation Et D'entretien page 11

Experttemp technology
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FROZEN, RISING, AND CRISPY PIZZA
CRISPY PIZZA setting can be used for frozen pizza when a crispier crust
is desired .
1 .
Place pizza directly on wire rack .
2 .
After selecting the PIZZA function, NO PREHEAT and CONVECTION buttons
will illuminate automatically . NO PREHEAT cannot be turned off for FROZEN,
RISING, and CRISPY functions . If you would like to preheat the oven, please
refer to TRADITIONAL BAKE instructions (page 10) .
3 .
Turning the TEMP knob, adjust temperature to recommended temperature .
4 .
Turning the TIME knob, adjust time to set cook time . DO NOT ADD IN TIME
FOR PREHEATING THE OVEN—THE OVEN DOES NOT NEED TO PREHEAT
WHEN THE NO PREHEAT OPTION IS CHOSEN .
5 .
Press the Start/Stop button to begin baking .
6 .
There will be an audible beep once the baking cycle is complete and the oven
will stop heating .
7 .
Unplug the appliance when not in use .
B ROI L FUN CT IO N
1 .
Place wire rack or baking pan in the top rack position .
2 .
Slide the baking pan under the wire rack to catch drippings during broiling .
3 .
Select the BROIL function . The oven will default to 450˚F . NO PREHEAT, TURBO,
and CONVECTION are not available on the BROIL setting .
4 .
If needed, turn the TIME knob to set cook time .
5 .
Press the START/STOP button to begin broiling .
Note: For best results when broiling meat, turn over the meat half-way
through broiling.
6 .
There will be 3 audible beeps once the broiling cycle is complete . The oven will
stop heating .
7 .
Unplug the appliance when not in use .
R OAST FU NC T ION
1 .
Place wire rack in the bottom rack position .
2 .
Select the ROAST function using the function knob . NO PREHEAT, TURBO, and
CONVECTION are not available on the ROAST setting .
3 .
Turning the TEMP knob, adjust temperature to desired temperature .
4 .
Turning the TIME knob, adjust time to set cook time . You may choose STAY ON
so the oven does not stop cooking until you press STOP . To choose STAY ON,
turn the time knob past 2 hours until you see "ON" .
5 .
Press the START/STOP button to begin preheating .
6 .
The temperature display will blink while the oven is preheating .
7 .
Once the oven has preheated, you will hear 2 audible beeps and the time set
will automatically begin counting down .
11

Publicité

Chapitres

Table des Matières
loading

Table des Matières