Cooktop/Night Light Replacement - Jenn-Air JMV8208BA Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Care and Cleaning
COOKTOP/NIGHT LIGHT
REPLACEMENT
CAUTION
To avoid personal injury or
property damage, wear gloves
when replacing light bulb.
1. Unplug the oven or turn off power
at the main power supply.
2. Remove the bulb cover mounting
screws.
3. Replace bulb with 20 watt
appliance bulb.
4. Replace bulb cover, and mounting
screws.
5. Turn the power back on at the main
power supply.
24
OVEN LIGHT
REPLACEMENT
1. Unplug oven or turn off power at
the main power supply.
2. Open the door.
3. Remove the vent cover mounting
screws. (2 middle screws)
4. Slide the grille to the left, then pull
straight out.
5. Remove the screw located above
the door near the center of the
oven that secures the bulb holder.
6. Remove bulb holder.
7. Replace bulb with a 20 watt
appliance bulb.
8. Replace the bulb holder.
9. Replace the grille and 2 screws.
Turn the power back on at the main
power supply.
OPTIONAL
Filler Kits
UXA3036BDB - BLACK
UXA3036BDW - WHITE
UXA3036BDS - STAINLESS
STEEL
When replacing a 36" range hood, the
filler kit fills in the additional width to
provide a custom built-in appearance.
For installation between cabinets only;
not for end-of-cabinet installation.
Each kit contains two 3"-wide filler
panels.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jmv8208bc

Table des Matières