Publicité
Les langues disponibles
Les langues disponibles
4 Commissioning
The appliance must be installed by qualified staff.
4.1
Proper completion checks
In accordance with the DTU 68.3, a visual inspection must be carried out after the installation to check
that:
▪
The sizing specifications are respected,
▪
The installation is safe (electrically, mechanically),
▪
The system's components are in good condition,
▪
The remote control and other components can be accessed for maintenance.
Make sure that the foam wedges inside the machine have been removed.
4.2
Powering up for the first time / Pairing
Open the battery compartment on the rear of the remote control and insert the batteries. Close the
battery compartment. The following screen appears:
Update the date and time on the remote control using the
control asks for the pairing.
Turn on the VMI® unit and press the
If the connection fails, press
Tip: move closer to the VMI® unit if you have problems connecting
button within 30 seconds after turning on the VMI® unit.
to start the procedure again.
buttons. Wait until the remote
47
Publicité
