Panneau Vanico-Maronyx 3/8" (0,9 cm) à fixer au gypse avec
silicone antimoisissures, appliqué en plusieurs petits ronds.
Vanico-Maronyx panel 3/8" (0.9 cm) to be fixed to gypsum panel
with anti-mildew silicone sealant, applied in many little circles.
Structure
Panneau de gypse 1/2" (1,3 cm)
murale
Gypsum panel 1/2" (1.3 cm
2" x 4"
Wall studs
2" x 4"
6¾"
12
PLANIX 60" X 36" - E
IMPORTANT
:
Avant d'installer la base de douche préparer du ciment-
colle modifi é au polymère qui servira à stabiliser la base de douche.
WARNING:
Before installing the shower pan, prepare a base in polymer-
modifi ed mortar to stabilize the shower base
Bride d'étanchéité préinstallée. Visser au mur et appliquer un
joint de silicone.
Built-in sealing flange. Screw it to the wall then apply silicone
sealant joint.
Trou à couper dans le contreplaqué pour le drain.
6" X 6"
Hole size to cut in the plywood for the drain.
18"
6" x 6"
trou/hole
2¾"
ZI
SEUIL
THRESHOLD
Marbre
1/4"
3/4"
2
2
ou tuile
1/2"
Stone or
tiles
Plancher existant
Floor
2¼"
INSTALLÉ
2¾"
2¼"
INSTALLED
Standard
Trou du drain / Drain hole
Hauteur visible avec tuile de ½"
Treshold height with ½" tile
Hauteur de seuil
2¾"
Treshold height
N.B. La position du drain
varie selon les dimensions de
chaque receveur.
Exemple: Avec une base de
60" X 36", le drain est
à 6¾" x 18" centre de la
structure murale.
Note: Location of the drain
may vary upon dimension of
the chosen showerpan.
Example: With a shower base
of 60" X 36", drain location is
6¾" x 18" (center) from wall
studs.