Assembly Instruction - Merax MS280844 Manuel D'utilisation

Assembly requires two persons normally.
Do not dispose the packing materials until you finish all assembly steps.
In addition to the included tool(s), assembly requires the following tools:
one Open End Wrench, one Screwdriver (NO. 19, 20)
Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools.
COUNTER-CLOCKWISE

Assembly Instruction

CLOCKWISE
Step 1
Install Stabilizer Assembly
Distinguish the Front Stabilizer (8) and Rear
Stabilizer (9) with transport wheels, and use Allen
Bolt (12), Washer (11) and Nut (10) to fix the Front
and Rear Stabilizers to the main frame.
Step 2
Install Pedal (L/R)
Please make sure that the direction of the Pedals (13)
in your hand is correct.
* Label L is marked on the Left Pedal, R is marked on
the Right Pedal.
Fasten the RIGHT Pedal by turning in a CLOCKWISE
direction.
Fasten the LEFT Pedal by turning in a COUNTER-
CLOCKWISE direction.
EN