Electrolux FI23/11NDV Notice D'utilisation page 16

16 www.electrolux.com
8.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
8.3 Ventilation requirements
The airflow behind the appliance must be
sufficient.
5 cm
8.4 Door reversibility
1. Loosen and remove the upper pin.
2. Remove the upper door.
All manuals and user guides at all-guides.com
min.
200 cm 2
min.
200 cm
3. Remove the spacer.
4. Loosen the middle hinge.
5. Remove the lower door.
6. Loosen and remove the lower pin.
7. Tighten the lower pin on the opposite
side.
8. Install the lower door.
9. Tighten the middle hinge.
2
10. Install the spacer.
11. Install the upper door.
12. Tighten the upper pin.