Dell N20 Serie Guide De Mise En Route page 32

Applying Interface configuration, please wait...
Next Steps
After completing the initial configuration described in this section, you can
connect any of the front-panel switch ports to your production network for in-
band remote management.
If you specified DHCP for the VLAN 1 management interface IP address, the
interface will acquire its IP address from a DHCP server on the network. To
discover the dynamically-assigned IP address, use the console port connection
to issue the following command:
• For the VLAN 1 routing interface, enter show ip interface.
To access the Dell OpenManage Switch Administrator interface, enter the
VLAN 1 management interface IP address into the address field of a Web
browser. For remote management access to the CLI, enter the VLAN 1
management interface IP address into a Telnet or SSH client. Alternatively,
you can continue to use the console port for local CLI access to the switch.
Your N20xx switch supports basic switching features such as VLANs and
spanning tree protocol. Use the Web-based management interface or the CLI
to configure the features your network requires. For information about how to
configure the switch features, see the User's Configuration Guide or CLI
Reference Guide available on the support site: dell.com/support/manuals.
30
Getting Started Guide