PULOX PO-650B Mode D'emploi page 34

2. In the status shown in Figure 11, press "left button" or "right
button" can change the setting of the item, then press "menu
button" to exit the status in Figure 11, and perform setting.
YES for starting recording, NO for do not recording.
3. In the status shown in Figure12, press "left button" or "right
button" can change the setting, press "menu button" will exit
the Figure12, and perform setting. YES for stopping recording,
NO for continue recording.
4. If the data storage function is turned on,when return to the
measure interface, a red "REC" sign and a flashing red dot
would appear on screen, which means the device is in a state
of storing.
5. In the state of storing, whatever interfaces the device is in
(measure interface, menu interface), the sign "Recording"
would appear on the screen in 30 seconds, and then the
screen will be automatically shut down. If pressing any button
(power on/off excluded) at this moment, the sign "Recording"
would appear on the screen, and then the screen will be
automatically shut down again; if pressing the "power on/off
button", the device would return to the former interface.
6. If turning on the data storage function, the former data
Figure 11
Figure 12
EN