PULOX PO-650B Mode D'emploi page 108

NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and reflection
from structures, objects and people.
 
3 5 .

 
d P
 
E
1
800 MHz to 2.5 GHz
 
7

 
d P
 
E
1
Where P is the
maximum output
power rating of the
transmitter in watts
(W) according to the
transmitter
manufacturer and d is
the recommended
separation distance
in meters (m).
Field strengths from
fixed RF transmitters,
as determined by an
electromagnetic site
a
survey, should be
less than the
compliance level in
each frequency
b
range.
Interference may
occur in the vicinity
of equipment marked
with the following
symbol: