Motorola MBP41S Guide De Démarrage Rapide

MODELS:
MBP41S
MBP41S-2
MBP41S-3
MBP41S-4
WARNING:
Strangulation Hazard. Children
have STRANGLED in cords. Keep
this cord out of the reach of
children (more than 3ft (1m)
away). Never use extension cords
with AC Adapters. Only use the
AC Adapters provided.
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User's Guide.
1. Setting up your Digital Video Baby Monitor
A. Baby Unit Power Supply
• Connect the DC plug of
the power adapter to the
DC JACK
DC jack at the bottom of
the Baby Unit and the
other end to the
electrical outlet.
• Only use the supplied
power adapter (5V DC/
1000mA).
• Slide the ON/OFF switch
to the ON position.
DC PLUG
C. Fastening the battery cover of the Parent Unit
• Place the battery
compartment cover over
the battery, making sure
that the battery wires are
carefully pushed down and
the cover fits properly.
• Gently tighten the screw in
a clockwise direction using
a small cross head or flat
end screwdriver.
B. Parent Unit Battery Installation
Black Red
D. Parent Unit Power Supply
• Connect the small plug of the power
Micro USB Socket
• Only use the supplied power adapter
• Charge for at least 12 hours before first
Micro USB Plug
US EN
• A rechargeable battery pack is supplied
and should be fitted, so that the Parent
Unit can be moved without losing the
link and picture from the Baby Unit(s).
• Charge the battery in the Parent Unit
before you use it for the first time or
when the Parent Unit indicates that
battery is low.
• Insert the wire tabs of the rechargeable
battery pack into the contact slots as
shown and fit the battery pack into the
compartment.
adapter to the Parent Unit and the other
end to the electrical outlet.
(5V DC / 600mA) with the micro-USB
style plug.
use.