onsen 3.0 Guide D'utilisation page 7

STEP 3 CONNECT PUMP TO 12V BATTERY
Connect the positive red wire to the positive (+) terminal of your battery
and the negative black wire to the negative (-) terminal of your battery.
NOTE: Connect using stranded wire with gauge size in relation to
distance or length as defined in the table below.
A 15 amp switch is recommended and should be installed on the
positive red wire.
Use a 15 amp fuse protection on the positive red wire to protect the
pump.
Red (+)
Ft. (m)
0-30 (0-9)
30-50 (9-15)
50-65 (15-19)
onsenproducts.com
onsenproducts.ca
Fuse
AWG (mm2)
AWG14
AWG12
AWG10
800-996-5559
Black (-)
(+)
Switch
support@onsenproducts.com
ENGLISH
(-)
Battery
7