onsen 3.0 Guide D'utilisation page 6

STEP 2 CONNECT WATER LINES
Insert the included hose barb or threaded quick connect adapters in the
inlet and outlet pump ports
tions.
If using the included strainer, insert into the inlet port and slide clip
lock port connection.
Use ½" (13mm) I.D. flexible hose (preferably braided or reinforced) to
connect to the inlet and outlet of the pump. Use hose clamps to secure
the hose to the hose barb connectors (if hose barb adapters are being
used).
A
C
onsenproducts.com
6
onsenproducts.ca
, and slide clips
A B
B
800-996-5559
to lock port connec-
C
support@onsenproducts.com
to
C