3: Connecting The Tv - Sony Bravia XBR-84X900 Mode D'emploi

Detaching the Speakers
from the TV
The Speakers can be detached from the TV
if you wish to use a separate audio system
(e.g. Home Theater System). Refer to the
instructions below on how to detach the
Speakers.
1
Disconnect the Speaker cable.
2
Remove the screw from the lower
Speaker Joint.
3
Remove the screw from the upper
Speaker Joint.
4
Pull the Speaker out horizontally to
detach the Speaker.
Repeat steps 1 to 4 to remove the other
Speaker.
2
1
3
4

3: Connecting the TV

~
• Use an antenna cable connector no greater
than 14 mm thick.
• Use an HDMI cable connector within 12 mm
(thickness) × 21 mm (width).
• Use Sony HDMI cable with "High Speed"
indication for HDMI connection.
x
Shown with a Set Top Box with
HDMI connection
Set Top Box
* Only HDMI 2 and HDMI 3 support 4K resolution
(located at the side of the TV).
Recommendation of the F type plug
Projection of the inner wire from the
connection part must be less than 1.5 mm.
7 mm max.
1.5 mm max.
(Reference drawing of the F type plug)
(Continued)
US
*
21
US