Sony Bravia XBR-84X900 Mode D'emploi page 17

Detaching the Floor Stand
from the TV
~
• Do not remove the Floor Stand for any
reason other than to attach the Table-Top
Stand or to install corresponding
accessories on the TV.
• When installing the TV on a wall, remove the
screws from the rear of the TV. (They are
fastened in the screw holes for wall
mounting.) Be sure to store the removed
screws in a safe place, keeping them away
from children.
• When attaching the Floor Stand again, be
sure to fasten the screws (previously
removed) to the original holes on the rear of
the TV.
1
Slide the Neck Covers upward to remove
them from the Floor Stand.
Neck Covers
2
Remove the screws that attach the Floor
Stand to the TV.
Screw
(M5 × 20)
~
• Be sure to store the removed screws in a
safe place. Reuse the screws when
attaching the Table-Top Stand.
3
Detach the TV set from the Floor Stand,
and place it in the carton lid. Support the
TV set when changing the Necks to
prevent it from tipping over.
(Continued)
Floor Stand
17
US
US