Function Checks Of The Charger; Li-Ion Battery; Reprocessing - B.Braun Aesculap Suhl GT203 Mode D'emploi

Aesculap Suhl GmbH
Add-On Set for Hybrid Shearing Machines
Insert Li-ion battery 5 in charging bay 3 of
charger 1 and charge the battery.
- or -
Insert the battery-powered shearing machine
FAV5 CL in charging bay 7 of the charger 1 and
charge the machine.
Charge state indicator 4 or 6 lights up red.
After charging, the charge state indicator 4/6
shines green and the battery-powered shearing
machine FAV5 CL with Li-ion battery 5 is ready for
operation.

4.2 Function checks of the charger

Carry out a visual inspection.
Prior to connecting the product to mains power:
– Check mains power cord 2 for possible damage.
– Check the product for any damage (e.g. bent con-
tacts of the charging bays).
Plug in mains power cord 2 at the device socket of
the charging station.
Plug in the mains plug at the mains power socket.
Insert Li-ion battery 5 in charging bay 3 of
charger 1 and charge the battery.
- or -
Insert the battery-powered shearing machine FAV5
CL in charging bay 7 of the charger 1 and charge
the machine.
Charge state indicator 4 or 6 lights up red.
After charging, the charge state indicator 4/6
shines green and the battery-powered shearing
machine FAV5 CL/Li-ion battery 5 is ready for
operation.
The product is ready for operation.
6
All manuals and user guides at all-guides.com

4.3 Li-ion battery

Fig. 1
5.
5
9
9
Hold battery-powered shearing machine FAV5 CL 8
and press battery release lock 9.
Pull out Li-ion battery 5 from battery-powered
shearing machine FAV5 CL.
Insert the charged Li-ion battery 5 in battery-pow-
ered shearing machine FAV5 CL 8 as far as it will
go.
The battery-powered shearing machine FAV5 CL 8
is ready for operation.

Reprocessing

Damage to, or destruction of the
product caused
cleaning/disinfecting or steriliza-
tion!
CAUTION
Only clean and disinfect the
product manually.
Do not sterilize the product
under any circumstances.
8
by mechanical