Cleaning And Maintenance - ANSMANN FL1000R-USB Mode D'emploi

USB CHARGE PORT (POWERBANK FUNCTION)
Devices with a max. charge current of 1000mA can be charged with the USB
charge port. To do so, pull out the sealing cap and connect the device to be
charged with a USB cable and then plug it into the charge socket. When not
being used, plug the sealing cap back into place.
Note: The powerbank function should only be used if the site floodlight is
switched off, in order to guarantee optimum charging of your device.
HOLDING DEVICES (STANDS, MAGNETS, ETC.)
If the light is to be fastened with a holding device, ensure that the holding
device is firmly/properly fastened in place in order to avoid possible
damage due to the light falling.
CLEANING/MAINTENANCE
Carry out cleaning tasks only when the mains plug is removed from the
mains power!
• Clean only with a slightly damp cloth, then rub it dry.
• Never submerge the product in water or other liquids.
• Do not allow fluids to enter the housing.
• Do not use hard brushes or sharp objects for cleaning.
Improper usage of the lamp may result in it being damaged:
• Do not throw or drop
• Use only in original condition
• Do not use while still in packaging
• Turn off after use
Deutsch |
16
Svenska | Italiano | Nederlands | Suomi | Norsk | Dansk
English | Français | Español | Português