Led Charge Indicator; Cleaning/Maintenance; Cleaning & Maintenance; Technical Data For Lamp - ANSMANN PL210R Mode D'emploi

3. Note: Do not active the lamp during charging. Check that the lamp is switched
off after starting the charging process.

LED CHARGE INDICATOR

The charging process is indicated by a red LED. If the rechargeable battery is fully
charged, the LED illuminates green.

CLEANING/MAINTENANCE

§ Clean only with a slightly damp cloth, then rub it dry.
§ Never submerge the product in water or other liquids.
§ Do not allow fluids to enter the housing.
§ Do not use hard brushes or sharp objects for cleaning.
Improper usage of the lamp may result in it being damaged:
§ Do not throw or drop
§ Use only in original condition
§ Do not use while still in packaging
§ Turn off after use

TECHNICAL DATA FOR LAMP

Article no.:
Illuminant:
Input voltage:
Input current:
Rechargeable battery:
Luminous flux:
Battery life:
Light range:
Charge time:
Protection type:
Storage temperature:
Operating temperature:
Weight of light incl. battery pack: 83.5g
Length of USB cable:
Dimensions of light:
LEGEND
Class 3 equipment
Conforms to the European directive
Do not look into the lamp
Waste Electrical and Electronic
Equipment (WEEE Directive)
12
1600-0305
7x 1W SMD LED | 1x 3W SMD
5V DC
Max. 500mA
Li-ion rechargeable battery pack 3.7V |
1100mAh | 4.07Wh
Main light 210lm | Auxiliary LED 90lm
Main light 2.5h | Auxiliary LED 5.0h
ca. Main light 20m | Auxiliary LED 30m
ca. 3h
IP20 / IK07
-20C° to 50°C
-10C° to 25°C
150cm
173 x 28 x 23mm
Deutsch | English
Svenska | Italiano | Nederlands | Portuguese
| Français | Español