Product Description; Prior To First Use - Inventum KO931B Mode D'emploi

2

product description

1. Handle
2. Thermostat indicator led
3. Thermostat button
4. Position button
5. Cable reel
6. Castor support plate with swivel castors
7. Oil filled rib
3
prior to first use
Before using the radiator for the first time, please proceed as follows: carefully unpack the radiator and remove all packaging
material and any promotional stickers. Keep the packaging (plastic bags and cardboard) out of the reach of children.
After unpacking the appliance, check it for external damage that may have occurred during transport.
Select a suitable location for the radiator. The radiator is provided with an anti-tilting protection, therefore always place
the radiator in a straight position on a heat resistant flat surface. Make sure there is enough space around it for sufficient
ventilation.
Check that the voltage corresponds with what is stated on the information plate before you insert the plug in the socket.
It is possible that the radiator smells "new" when used for the first time, this is entirely normal, will do no harm and the smell
will disappear automatically.
INSTALLATION OF THE SWIVEL CASTORS
For easy mounting of the swivel castors, place the radiator upside down
on a flat surface.
Attach the two castor support plates with the swivel castors to the bottom
side of the radiator, using the wing nuts.
After assembly, set the radiator straight and make sure all swivel castors
make contact with the floor.
1
2
3
4
5
6
7
13
English •