Publicité
Les langues disponibles
Les langues disponibles
840155502 ENv01.qxd:840153700 ENv01.qxd
How to Clean
Quick Cleaning
Quick cleaning should only be used to
rinse the blender between batches of
processing the same food. When the
processing of a single type of food is
finished, the blender should be disas-
sembled and thoroughly cleaned as
instructed below.
To quick clean, pour 2 cups (500 ml)
warm water in jar and add 1 drop liquid
dishwashing detergent. Run the blender
on DISPENSE for 10 seconds. Flush
soapy water through dispenser until
Regular Cleaning
Electrical Shock Hazard.
w WARNING
Disconnect power before cleaning.
Do not immerse cord, plug or base in any liquid.
1. Unplug blender from electrical outlet.
2. Wipe blender base and cord with a
damp cloth or sponge. To remove
stubborn spots, use a mild, non-
abrasive cleanser.
3. To clean jar, unscrew cutting
assembly from jar.
4. Carefully remove gasket from
cutting assembly.
5. Remove dispenser assembly from jar
NOTE: DO NOT remove seal rings
from dispenser adapter.
6. Carefully wash cutting assembly,
gasket, jar, and lid in hot, soapy
water. Rinse and dry thoroughly.
Do not soak. Do not wash cutting
assembly or gasket in a dishwasher.
6
6/28/10
cleaned. Discard soapy water. Rinse
blender jar with clean water. Flush clean
water through dispenser until cleaned.
This function is not a substitute for
regular cleaning as instructed below
This function should never be used
when blending any mixture containing
eggs, milk, or any other dairy products.
NOTE: All parts except the cutting
assembly and gasket may be
washed in the dishwasher (on the
top rack only). Some part distortion
may occur if your household dish-
washer temperature is higher than
normal or if the parts are placed too
close to the heating element.
7. Reassemble cutting assembly and
gasket onto jar, and replace jar onto
blender base. Ensure dispenser
by turning
assembly or spout cap are fully
counterclock-
rotated clockwise to lock into posi-
wise four
tion (reverse of Step 5 above).
revolutions.
8. Store blender with lid or filler cap
removed to prevent container odor.
5:01 PM
Page 6
Publicité
