Télécharger Imprimer la page

Russell Hobbs 23840-70 Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
USING YOUR KETTLE
1.
Open the lid.
2.
Fill with at least 1 cup of water, but not above max.
3.
Close the lid, and press down to lock it.
Move the switch to I.
4.
5.
The light will come on. The kettle will start to heat.
6.
When the water boils the kettle will switch off.
To switch off manually, move the switch to O
7.
BOIL DRY PROTECTION
If your kettle boils dry, a safety cut-out device will automatically switch it off. If this happens,
unplug your kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle
to boil dry will shorten the life of the element.
CARE AND MAINTENANCE
1.
Unplug the stand, and let the kettle cool before cleaning.
2.
Wipe all surfaces with a clean damp cloth.
Descale regularly, (at least monthly).
Use a proprietary descaler. Follow the instructions accompanying the descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
RECYCLING
W
To avoid environmental and health problems due to hazardous
substances, appliances and rechargeable and non-rechargeable batteries
marked with one of these symbols must not be disposed of with
unsorted municipal waste. Always dispose of electrical and electronic
products and, where applicable, rechargeable and non-rechargeable
batteries, at an appropriate official recycling/collection point.

Publicité

loading