Publicité
10.7. PROTOCOLES DE SUPERVISION
Catalogue des messages Syslog
Le tableau ci-dessous décrit les messages Syslog envoyés par l'appareil.
Catégorie
Catégorie du
Syslog
message
(valeur)
user (1)
Configuration
via la face avant
user (1)
Configuration
via Telnet
user (1)
Configuration
via page Web
user (1)
Configuration
via page Web
user (1)
Configuration
via page Web
user (1)
Configuration
via page Web
user (1)
Configuration
via page Web
user (1)
Configuration
via page Web
user (1)
Configuration
via page Web
user (1)
Configuration
via page Web
user (1)
Configuration
via page Web
user (1)
Configuration
via page Web
kern (0)
Redémarrage
auth (4)
Interface
sécurisée
daemon
SNMP
(3)
daemon
Carte SD
(3)
daemon
Lien Ethernet
(3)
daemon
Lien Ethernet
(3)
ntp (12)
Observateur
NTP
MDE-LEDI-NETWORK-ITSV2m-4097V3.0
A new configuration has been defined through the front panel.
A new configuration has been defined through the Telnet interface.
A new configuration has been defined in the \"Alarms\" Webpage.
A new configuration has been defined in the \"Inputs\" Webpage.
A new configuration has been defined in the \"Interface\" Webpage.
A new configuration has been defined in the \"Network\" Webpage.
A new configuration has been defined in the \"NTP\" Webpage.
A new configuration has been defined in the \"PTP\" Webpage.
A new configuration has been defined in the \"Output\" Webpage.
A new configuration has been defined in the \"SNMP\" Webpage.
A new configuration has been defined in the \"NTP Statistics\"
Webpage.
A new configuration has been defined in the \"Update\" Webpage.
System has restarted, reason : reset or power failure.
Web
The secure web interface has been accessed.
A SNMP trap has been sent, with ID XX
XX est l'identifiant du trap SNMP.
An error occurred with the SD-Card.
Ethernet link connection
Ethernet link error. Check the cable
NTP Client with MAC XX:XX:XX:XX:XX:XX address from IPv4/IPv6
address YY...YY has not requested any synchronization for ZZ
hour(s)
Ce message est envoyé à condition que le mécanisme NTP Watcher
soit activé dans la page « NTP Statistics" (cf. partie 4.2.6). Le temps
écoulé depuis que le client s'est synchronisé pour la dernière fois est
configurable sur la même page Web.
Texte envoyé
Gravité
Syslog
(valeur)
info (6)
info (6)
info (6)
info (6)
info (6)
info (6)
info (6)
info (6)
info (6)
info (6)
info (6)
info (6)
info (6)
info (6)
notice
(5)
error (3)
error (3)
error (3)
error (3)
179
Publicité
