Safety precautions
• Do not allow infants and small children to play with the remote control to prevent them from
accidentally swallowing the batteries.
• Do not use rechargeable (Ni-Cd) batteries. It may damage the remote control.
• To prevent malfunction or damage of the remote control:
- Remove the batteries if the unit is not going to be used for a long period of time.
- New batteries of the same type must be inserted following the polarity stated.
Quick Guide
B
Press to restore
the remote control
to default setting.
Not used in normal
operations.
(Technical / Service
Confi guration use)
2
Inserting the batteries
3
Clock setting
A
1 Press
• Press
A
2 Confi rm
B
Basic operation
1 Press
2 Press
3 Select the desired temperature.
1 Pull out the back cover of
1
remote control.
2
2 Insert AAA or R03 batteries.
3 Close the cover.
and set the time
and hold for approximately 5 seconds to
show time in 12-hour (am/pm) or 24 hour indication.
.
to start/stop the operation.
to select the desired mode.
AUTO
DRY
COOL
Selection range: 16.0 °C ~ 30.0 °C / 60 °F ~ 86 °F.
• Press and hold
Up
approximately 10 seconds
to switch the temperature
Down
indication in °C or °F.
.
HEAT
for