Technical Information; Installation - Kuppersbusch IKE3390-2 Notice D'utilisation

12
Problem
If the advice does not lead to
the desired result, call the
nearest brand-mark service.
Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service
Center .

TECHNICAL INFORMATION

Technical data
Dimensions of the recess
Voltage (V)
Frequency (Hz)
The technical information is situated on the
rating plate on the internal left side of the
appliance and in the energy label.

INSTALLATION

WARNING! Refer to Safety
chapters.
Positioning
This appliance can be installed in a dry, well
ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Possible cause
The Intensive cooling func-
tion is switched on.
There is no cold air circula-
tion in the appliance.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to
"Installation".
3. If necessary, replace the defective door
gaskets. Contact the Service Center.
Height × Width × Depth (mm):
1780 x 560 x 550
230-240
50
Cli-
mate
class
SN
N
ST
T
Solution
Refer to "Intensive cooling
function".
Make sure that there is cold air
circulation in the appliance.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C