Saba WD1215L21W Mode D'emploi page 65

Connect the inlet pipe as indicated, there are two ways to connect
the inlet pipe.
1. Connection between ordinary tap and inlet hose.
slide bushing
damp nut
Loosen clamp nut and Tighten clamp nut Press slide bushing, Connection finished
four bolts insert inlet hose into
connecting base
2. Connection between screw tap and inlet hose.
GB
slide bushing
Tap with threads and inlet hose Special tap for washer dryer
Connect the other end of inlet pipe to the inlet valve at the
backside of product and fasten the pipe tightly clockwise.
64