Publicité
Les langues disponibles
Les langues disponibles
Maximum longevity of 12 years
The maximum longevity of euroline® products in synthetic and textile material is 12 years from the date of production under optimal storage
conditions and without being used.
Maximum operating life of 10 years
The maximum operating life with occasional, proper use without visible wear and tear under optimal storage conditions is 10 years from the
date of first use.
Storage period of 2 years
The storage period before first use and without reducing the maximum operating life is 2 years from the date of production.
ATTENTION: Provided that all instructions on safe handling, UV-light protected storage and transport are observed, the following, non-binding
indications on the lifespan can be recommended:
•
Intensive, daily use
•
Regular use throughout the year
•
Regular seasonal use
•
Occasional use (once a month)
•
Sporadic use (with perfect UV-light protected handling)
Metal fittings such as buckles, karabiners, etc.:
The life of metal fittings is generally unlimited; however a periodic inspection of metal fittings must be carried out regarding damage, distortion
and wear as well as functioning.
When different materials are used in one product, the period of use is subject to the most sensitive materials.
Extreme conditions of use can cause the elimination of a product after only using once (type and intensity of use, field of application, aggressive
environment, sharp edges, extreme temperatures, chemical substances etc.).
A PFPE must definitely be discarded:
•
with damage to supporting parts, which are essential for safety, such as webbings and seams (tears, cuts or other)
•
with damage to plastic and/or metal fittings
•
in case of strain by a fall or heavy load
•
after the application period has elapsed
•
if a product does not seem safe or reliable anymore
•
if the product is outdated and does not comply with the technical standards anymore (modification of legal regulations, norms and technical
rules, incompatibility with other equipment etc.)
•
if the history of use is unknown or incomplete (test manual)
•
if the identification of the product does not exist or if it is illegible or missing (even partly)
•
if the instructions for use/test manual of the product are missing (because product history can not be tracked!)
•
Please also refer to item: 2) Regulations for the owner of the equipment
If the visual inspection carried out by the user, holder of the equipment or the competent person results in complaint or if the PPE has elapsed,
it has to be discarded. The elimination has to be made in such a way that reuse in action can absolutely be excluded (e.g. by cutting and
disposing of belts, fittings etc.).
In case of frequent use, intensive wear or extreme environmental influences, the allowed period of use becomes shorter. The decision on the
operational capability of the device is up to the responsible COMPETENT PERSON within the prescribed periodic inspection.
4)
Liability (complementing point Caution)
Neither the A. Haberkorn & Co GmbH nor its sales partners assume any liability for accidents in relation to the present product and consequential
personal and/or material damage, especially in cases of misuse and/or incorrect use. In all cases the users are responsible for risks taken.
5)
Product specific notes
This product is made of polyester or polyamide yarn and/or a combination of
both materials. HORAX III must not be combined with any other than CE-marked
elements of personal fall protective equipment.
The full body harness HORAX III is approved for use in the following systems
according to EN 363:
-
restraint systems
-
work positioning systems
-
systems for rope assisted access
-
fall arrest systems
-
rescue systems
HORAX III can be combined with equipment elements intended for the above
systems. The combination and use with any equipment element must be checked
by the user before its first use.
(1)
rear arresting point - aluminium D-ring
(2)
front arresting point - aluminium D-ring
(3)
front textile fall arrester eyelet
(4)
front fall arrester eyelet - aluminium D-ring
(5)
fall arrester eyelets right and left - aluminium D-ring
(6)
stainless steel shackle - screwed, can be opened to change the sliding
bridge (8)
and/or the aluminium ring (7)
(7)
free fall arrester eyelet - exchangeable aluminium ring
(8)
textile sliding belt - exchangeable, available in different lengths
(9)
adjustable buckles - size adjustment
(10) insertion buckles - adjustment possibility
(11) adjustable buckles - individual adjustment for ergonomic sitting
(12) adjustable buckles - individual adjustment for ergonomic sitting when
working by
means of the moving fall arrester eyelet
(13) twistlock karabiner for easier putting on
(14) climbing clamp - also detachable; the instructions for use are enclosed
(15) textile fall arrester eyelet - centrally on the back of the hip belt (sewn endless
sling with a big A-loop pointing downwards and a smaller loop pointing upwards
- less than 1 year
- 1 year to 2 years
- 2 to 3 years
- 3 to 4 years
- 4 to 6 years
10
Publicité
