Fein ALG80 Mode D'emploi page 6

This equipment complies with FCC and
IC RSS-102 radiation exposure limits
set forth for an uncontrolled
environment.
Symbols, abbreviations and terms used.
Symbol, character
UKCA
WARNING
X
A)
B)
Character Unit of measure-
ment, international
V
U
1
V
U
2
P
W
1
Hz
f
Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket.
Confirms the conformity of the battery charger with the Guidelines of the European
Community.
Confirms the conformity of the power tool with the directives of Great Britain (England,
Wales, Scotland).
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
Recycling symbol: designates recyclable materials
Worn out battery chargers and other electro-technical and electrical products should be
collected separately and sorted for environment-friendly recycling.
Product with double or reinforced insulation
Battery type
Weight according to EPTA-Procedure 01
Time-lag device fuse, whereby X represents the character for the time/power character-
istic acc. to IEC 60127.
Use the device only in rooms and do not subject it to rain.
Direct current
Dangerous voltage
Warning! Electrical voltage
USB charging port
®
functionality
Bluetooth
The mobile devices must be compatible with Bluetooth
and support the Generic Access Profile (GAP).
The operating range can vary greatly depending on external conditions, including the
receiver being used. Within enclosed spaces and through metal barriers (e.g. walls,
®
shelves) the Bluetooth
Unit of measure-
ment, national
V
V
W
Hz
This equipment should be installed and
operated with a minimum distance of
20cm between the radiator and any
part of your body.
operating range can be significantly reduced.
Explanation
Rated supply voltage
Rated output direct voltage
(rated battery voltage)
Power input
Frequency
®
low energy devices (version 4.1)
en
11