Identifying The Machine; Position Of The Operator; Responsibility Of The Manufacturer; Replacement Of Parts - Dulevo SPARK 1000 BH Mode D'emploi Et D'entretien

English

Identifying the machine

The nameplate provides the following infor-
mation:
A Model.
B Battery voltage / Power.
C Serial number
D Year of manufacture
E IP Index of Protection.
F Dry weight.
G Maximum negotiable gradient.
H Name of manufacturer.

Position of the operator

The operator has to sit on the driver's seat during the work.

Responsibility of the manufacturer

The manufacturer, Dulevo International S.p.A., declines any responsibility arising from breaks, acci-
dents, etc. due to the lack of knowledge (or to the lack of application) of the prescriptions contained
in this manual. The same holds true for any change, variation and/or installation of accessories that
has not been previously authorized.
In particular Dulevo International S.p.A. declines any responsibility for any damage caused
by:
- Acts of God
- Wrong maneuvers
- Lack of maintenance
The Manufacturer cannot be held responsible for damages (of any type) caused by the operations
performed on the machine (servicing, repair, etc.) if these were not carried out by Dulevo Interna-
tional S.p.A. AUTHORIZED PERSONNEL (except for different agreements authorized by Dulevo
International S.p.A.).

Replacement of parts

In the replacement of parts use only GENUINE PARTS, tested and authorized by the MANUFAC-
TURER.
Do not wait until the components are worn out through use. Replacing a component at an op portune
moment means a better functioning machine and also a saving due to the fact that major damage
has been avoided.

Technical assistance

The manufacturer puts Its Technical Assistance Service at the disposition of the customer to resolve
any problem related to the use or maintenance of the machine.

Requests for assistance

Any such requests should be made after a close analysis of the problems and their causes.
When making written requests please specify the following information:
- Machine model
- Registration number
- Details of problems encountered
- Checks made
- Adjustments made and their effect
- Any other information that might be useful
EN-12
H
A
B
E
F
2014-07
1000 BH - 1000 EH - 1000 YH
C
D
G