Echo MTA-DTB Manuel D'utilisation page 17

Observe the following precautions when checking and maintaining your product after use:
 Turn power to unit off, remove battery, and make sure all moving parts have come to a complete stop.
An accident could occur if the product starts unexpectedly.
 Allow unit to cool before performing service.
You could burn yourself.
 Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or
authorized service providers.
 Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
Servicing guidelines
Area
Angle transmission
Cut off knife
Screws, bolts and nuts
* Or 50 hours, whichever occurs first.
 Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.
Maintenance and care
If you have any questions or problems, please contact your dealer.
Angle transmission
IMPORTANT
Maintenance
Grease
Inspect/Clean
Inspect, Tighten/Replace
IMPORTANT
Maintenance and care
Maintenance and care
WARNING
Page
15
-
-
1. Remove the plug (A) and drain screw (B) from the angle
transmission (C).
2. Add grease into the transmission until old grease is pushed
out. If necessary, use a low pressure pump.
 Use good quality lithium multi grease.
3. Reinstall the drain screw and plug.
15
Before use
•
•
NOTE
Monthly
•*