Ukca Declaration Of Conformity; Warranty - MAGNAFLUX Y-2 AC Yoke Manuel D'utilisation

UKCA DECLARATION OF CONFORMITY

In accordance with EN ISO 17050-1:2010
Object of the declaration:
Product: AC Yoke
Model/type: Y-2
Manufacturer: Magnaflux
Address: 155 Harlem Avenue, Glenview, IL 60025, USA
This declaration is issued under the sole responsibility of the manufacturer.
The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Elec-
trical and Electronic Equipment Regulations 2012
2009/125/EC Eco Design Directive
Conformity is shown by compliance with the applicable requirements of the following documents:
Reference & Date
EN61010-
1:2010+A1:2019
IEC 61326-1:2020
EN ISO 9934-3:2015 Non-destructive testing – Magnetic particle testing – Part 3: Equipment
Signed for and
Magnaflux
on behalf of:
Place of issue: DeWitt, Iowa, United States of America
Date of issue: April 2021
Name: Mike Fryauf
Position: Engineering Manager
Signature:

WARRANTY

Refer to the Magnaflux Warranty Statement at www.magnaflux.com.
SUPPORT
If you have a question please contact Magnaflux at:
1-847-657-5300
support@magnaflux.com
www.magnaflux.com
You can also contact your local Distributor or Magnaflux Authorized Service Center directly;
contact information is available at www.magnaflux.com.
Title
Safety requirements for electrical equipment for measurement, control,
and laboratory use - Part 1: General requirements
Electrical equipment for measurement, control and laboratory use -
EMC requirements - Part 1: General requirements
Y-2 Yoke Operating Manual
7