Port Settings - Cameo XNODE 8 Manuel D'utilisation

Then push the [OK] button and select a character to add.
Confirm your selection by pressing [OK].
Repeat the above steps for the remaining characters. Then, press [Cancel] to finish inserting characters.
Press [Cancel] again to quit the editor.
Press [OK] to store the changes or press [Cancel] to discard all changes.
SHORT NAME
The short name can be viewed and edited under Home > Menu > Art-Net > Short Name (Art-Net 4 mode) or Home > Menu > Art-Net >
Node 1 > Short Name and Menu > Art-Net > Node 2 > Short Name (Art-Net 3 mode). Editing the short name is done in the same way the
name is edited.

PORT SETTINGS

For each port, there is a settings menu under Home > Menu > Ports > Port [1-8]. E.g. the menu for port 1 is under Home > Menu > Ports
> Port 1. The port settings menu contains the items described below. When opening this screen with a double tap to the port button (button
[1] – button [8], this menu is shown as a reduced version with only the options required for configuring the current mode.
13