Cooper Lighting Solutions Lumiere 1004-A1-RCS-FL-LED2790-F-BK-L1-UNV-RSM Instructions D'installation page 5

CYLINDERS
1. Unpack and ensure all included parts are present.
2. Remove Trim Ring by turning counter-clockwise to release.
3. Loosen 3x 8-32 nuts with an 11/32 nut driver or wrench.
4. Twist Universal Mount Plate to release from fixture assembly.
5. Attach Universal Mount Plate to existing junction box with proper hardware (not included). Route building AC supply
wires and ground wire out of center hole in Universal Mount Plate.
6. Connect building AC supply wires from junction box to input wires on fixture enclosure. See wiring table for reference.
7 . Secure the Fixture Assembly to the Universal mount plate and gasket with the 3x 8-32 nuts. Tighten nuts using a 11/32
nut driver or wrench. Ensure adequate gasket compression to provide proper seal from the environment.
8. Attach Trim Ring by turning clockwise to secure.
GN
WH
BK
PU
GR
Universal
Fixture Assembly
Mounting Plate
Figure 10.
Installation Instructions - Lanterra - RSM (Round Surface Mount)
8-32 Nuts
Trim Ring
COOPER LIGHTING SOLUTIONS
Figure 11.
IL509003EN Installation instructions
5 5